Jump to content
Sign in to follow this  
Gareth

Nozzle temperature doesn't meet its mark and is unstable

Recommended Posts

Gareth    0

My mankati Fullscale XT Plus has been working well for over a year now, hasn't needed and replacement parts.

Recently, both nozzles have not been able to meet their mark. For a 210 degree pla print, it will reach 196 and then drop down to 182. It keeps repeating this process, reaching 196 and falling, never reaching its mark. If I manually set it to 260, it will heat to 242 and drop down to 225, rise again and keep repeating. My heat bed is fine as it will reach its mark and hang there perfectly.

Support have gotten me to replace the thermostat, the thermister heat tube, no change. They got me to refresh the firmware, still no change. I'm beginning to worry as the more I do, the more things point to the board or psu. I have no idea what to look for when looking at the board. 

I have heard about something called DIP being the problem in similar instances, although I have no idea how to go about checking that.

Anyone got any ideas? I have been trying to fix this to no avail for 2 weeks.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×